Showing 17–32 of 38 results
The Magnaflux General Purpose Field Indicator is a non-certified rugged, pocket sized, non-calibrated field indicator that measures 2 1/2” in diameter and is perfect for field use. It is scaled +10 or -10 gauss from 0 center. Each division represents 1 gauss.
The Mag Kit is a sectional magnetic particle testing system for low volume non-destructive testers with the benefits of an operational magnetic wet bench but without the investment of a production-level mag bench.
Using a P-series portable power pack as a power supply, the Mag Kit is an economical, easy to operate alternative to more expensive, higher volume bench units when volume processing is not required. It provides the same level of inspection dependability in a lower volume, lower cost equipment package.
The Magnaflux Mag Kit Pump has been developed for use with Magnaflux Mag Kit units to provide continuous spray and recapture of the Magnaglo bath.
Our portable sprayers apply an even, adjustable flow of magnetic particles across large test parts or in situations where only spot particle application is required. Available in both liquid solution and dry powder models, our sprayers dramatically improve coverage time and uniformity.
The Pie Gauge is a tool for quickly verifying the direction of magnetic flux on a surface. It is made from eight ferrous segments, braised into a single piece, providing a star pattern of nonferrous discontinuities. Typically used with dry powders for yoke inspection, the Pie Gauge can be held at any angle and will generate indications perpendicular to the direction of the magnetic flux.
Laminated Magnetic Flux Strips, also known as Type G Burmah-Castrol Strips, have a core of high permeability steel with brass cladding 0.002 in / 0.05 mm thick on both sides. The core material has three slots of different widths, providing discontinuities that show as linear indications in a magnetic field. The strips are commonly used with wet visible materials for power pack equipment and yoke inspections, but can also be used with dry magnetic powders.
The MPI Test Bar is a standardized test piece conforming to the requirements of NAVSEA T9074-AS-GIB-010/271 to demonstrate magnetic particle equipment performance. The MPI Test Bar can be used with wet bench equipment, power packs, or magnetic yokes.
Our portable sprayers apply an even, adjustable flow of magnetic particles across large test parts or in situations where only spot particle application is required. Available in both liquid solution and dry powder models, our sprayers dramatically improve coverage time and uniformity.
The QB2-Plus provides a quantitative verification of Quick Break function and measures the duration of the magnetizing shot. The QB2-Plus can verify the correct function of AC, HWDC, and FWDC equipment, and verify Quick Break function on 3-phase FWDC units. Shot time and Quick Break voltage are alternately shown on the LCD display after each reading.
QQIs are artificial flaw (notched) shims that are attached to example parts, commonly used to demonstrate both field strength and direction within a part. Available in several different configurations, QQIs are thin steel shims with etched patterns in circular and cross shapes to provide indications in all directions. The steel alloy and notch dimensions, as specified in AS 5371, are designed to provide indications when the base part is magnetized to at least 30 gauss.
The Tool Steel Ring is a standardized test piece commonly used with wet bench magnetic particle equipment. The ring is machined from AISI O1 Tool Steel, annealed, tested and certified to meet AS 5282 specifications.
The UV-A Meter is a compact, rugged, easy to operate, digital radiometer for measuring and calibrating UV-A black light sources used in fluorescent penetrant testing and fluorescent magnetic particle inspections for non-destructive testing.
The Visible Light Meter accurately measures visible light in either foot-candles or lux and includes a permanently affixed visible light sensor specially constructed to measure visible white light in the range of 400-760 nm for non-destructive testing.
A gun with trigger action for washing parts during the penetrant process.
