10 Gauss Calibrated Field Indicator
The Magnaflux 10 Gauss Calibrated Field Indicator has a scale range of +10 or -10 gauss from 0 center. Each large-scale division represents 1 gauss and the small divisions represent 1/2 gauss.
Our magnetic yokes will handle your most demanding magnetic particle inspection jobs with ease. Ideal for in-plant inspection and repair, you can rely on our yokes to detect surface cracking in any ferro-magnetic material, including welds, automotive components, steel and grey iron castings.
These magnetic particle testing accessories will help you optimize your mag particle testing processes so you have a complete solution to meet all your non-destructive testing application needs.
Showing 1–16 of 25 results
20 Gauss Calibrated Field Indicator
The Magnaflux 20 Gauss Calibrated Field Indicator is for general purpose use as may be required in various demagnetization specifications. Scaled +20 or -20 gauss from 0 center with large divisions at 2 gauss and small divisions at 1 gauss.
Centrifuge Tubes
Our centrifuge tubes help you easily and accurately measure the magnetic particle concentration of your mag particle bath as part of your regular system performance checks for ASTM E709, ASTM E1444 or ASME BPVC.
EV6000 – Handheld LED UV Lamp
The EV6000 LED UV lamp is a portable, hand-held UV lamp for fluorescent non-destructive testing applications like fluorescent penetrant testing and fluorescent magnetic particle inspections.
The EV6000 features a uniform beam with no hot-spots and a 9 in / 23 cm wide beam, 33% wider than the next widest hand-held UV lamp in the industry.
Custom-designed optics provide intense and even UV-A coverage of UV-A to easily identify indications, and an integrated filter ensures minimal visible light emission to improve inspection reliability.
The EV6000 is certified to NDT sta
EV6500 – High-Intensity Dual Light LED UV Lamp
The EV6500 is a hand-held, portable LED UV lamp with built-in white light LEDs for non-destructive testing applications like fluorescent penetrant testing and fluorescent magnetic particle inspections.
Designed with broad-beam profile for in-line and hand-held use, the EV6500 will decrease inspection time by improving indication visibility with 7,000 μW/cm2high intensity UV-A illumination and the widest coverage area in its class.
FSM-2 – Magnetic Field Strength Meter
The FSM-2 is used for tangential measuring of the magnetic field strength in DC and AC fields. A tangential field probe is attached to the workpiece’s surface during magnetisation, and the hall sensor measures the voltage change produced by the magnetic field. This meter measures the true RMS of asymmetric magnetic fields.
General Purpose Field Indicator
The Magnaflux General Purpose Field Indicator is a non-certified rugged, pocket sized, non-calibrated field indicator that measures 2 1/2” in diameter and is perfect for field use. It is scaled +10 or -10 gauss from 0 center. Each division represents 1 gauss.
Mag Kit – Modular Magnetic Particle Inspection System
The Mag Kit is a sectional magnetic particle testing system for low volume non-destructive testers with the benefits of an operational magnetic wet bench but without the investment of a production-level mag bench.
Using a P-series portable power pack as a power supply, the Mag Kit is an economical, easy to operate alternative to more expensive, higher volume bench units when volume processing is not required. It provides the same level of inspection dependability in a lower volume, lower cost equipment package.
Mag Kit Pump
The Magnaflux Mag Kit Pump has been developed for use with Magnaflux Mag Kit units to provide continuous spray and recapture of the Magnaglo bath.
Magnetic Flux Indicator Gauge
The Pie Gauge is a tool for quickly verifying the direction of magnetic flux on a surface. It is made from eight ferrous segments, braised into a single piece, providing a star pattern of nonferrous discontinuities. Typically used with dry powders for yoke inspection, the Pie Gauge can be held at any angle and will generate indications perpendicular to the direction of the magnetic flux.
Magnetic Flux Indicators
Laminated Magnetic Flux Strips, also known as Type G Burmah-Castrol Strips, have a core of high permeability steel with brass cladding 0.002 in / 0.05 mm thick on both sides. The core material has three slots of different widths, providing discontinuities that show as linear indications in a magnetic field. The strips are commonly used with wet visible materials for power pack equipment and yoke inspections, but can also be used with dry magnetic powders.
Magnetic Particle Test Bar
The MPI Test Bar is a standardized test piece conforming to the requirements of NAVSEA T9074-AS-GIB-010/271 to demonstrate magnetic particle equipment performance. The MPI Test Bar can be used with wet bench equipment, power packs, or magnetic yokes.
NiCr Test Panels For Liquid Penetrant Testing NDT
NiCr test pieces for liquid penetrant inspection will help you maintain your PT testing process by verifying penetrant sensitivity and performance. Use to check for penetrant deterioration, to compare different penetrants or to verify sensitivity or visibility. NiCr Test Panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 20 microns
Penetrant Testing Applicator – Portable Pressure Sprayer
The Portable Pressure Sprayer is easy to use, light-weight pressure sprayer for spot application of penetrants, magnetic particles, developers and cleaners. It is easy to disassemble for cleaning, has a 1 quart capacity and a maximum pressure of 200 psi.
QB2- Plus – Quick Break Tester
The QB2-Plus provides a quantitative verification of Quick Break function and measures the duration of the magnetizing shot. The QB2-Plus can verify the correct function of AC, HWDC, and FWDC equipment, and verify Quick Break function on 3-phase FWDC units. Shot time and Quick Break voltage are alternately shown on the LCD display after each reading.